Your iPod was packaged with a Quick Start guide, which includes illustrated, step-by-step instructions on getting started with your iPod.
Connecting iPod to your computer
Before you connect the iPod to your computer, you need to download and install the iTunes software from www.itunes.com. Then use the provided USB cable to connect your iPod to your computer. The 30-pin end of the cable connects to the bottom of your iPod, and the USB male end connects to any available USB port on your computer.
For owners of the all-new iPod shuffle, use the supplied USB cable and shuffle dock to connect your iPod shuffle directly to your computer’s USB port.
Charging your iPod
You may charge your iPod using the supplied USB cable. Your battery will recharge while your iPod is connected to your computer. If you want to charge the battery when you are not near a computer (traveling, driving, etc.), you can purchase an optional wall or car charger. Click to see iPod chargers »
Turn on the backlight to use your iPod in the dark
Your iPod includes a backlight that lets you use the screen in the dark. You can quickly turn on the backlight by pressing and holding the Menu button. To turn it off, press and hold down Menu again. You can also change the length of time the backlight stays on by choosing Settings, then Backlight Timer.
Use menus while songs are playing
Did you know that you can navigate your iPod’s menus while playing music? When a song is playing, just choose the Menu button to navigate out of the song, and use the controls to go anywhere you’d like in the iPod. When you want to go back to your song, use the Menu button to navigate to the top level of the iPod, and select Now Playing from the menu.
Moving around in a song or audiobook
While you are listening to a song or audiobook, you can move to specific places within the song or audiobook by pressing the center button. When you see the playback progress indicator change to a diamond, use the Click Wheel to move around within the file.
Shuffling your songs
There are two ways to shuffle songs on your iPod. From the main menu you can choose Shuffle Songs. This will play all the songs on your iPod, except audiobooks, in random order. If you always want your songs to play in shuffled order, go to the Main menu and choose Settings, and then Shuffle. You have the option to shuffle by song or album.
Try out the basic controls on your iPod.
Use the Click Wheel to move between items in a menu.
Use the Select button to select an item in a menu.
Click the Play/Pause button to toggle between playing and pausing your song.
Use the Click Wheel to change the volume of a song while it is playing.
Press and hold the Play/Pause button for three seconds to turn the iPod off.
Use the Forward and Back buttons to move between songs. Hold them down to fast-forward and rewind a specific song.
Use the Hold switch to lock the iPod controls.
Use the Menu button to go back to the previous menu.
Here are some ways you can get maximum playtime from your iPod.
Turn off the iPod when you are not using it by pressing and holding the Play button until it turns off.
Remember that the iPod automatically turns off after two minutes of inactivity.
Use the hold switch to keep the iPod from accidentally being turned on.
Charge the iPod daily, either with the power adaptor or by connecting it to your computer when it is turned on.
Turn off the backlight, and only use it when it is needed by clicking and holding the menu button till it comes on. You can turn it off by clicking and holding Menu again.
The iPod and iPod mini have a 3.5mm headphone jack you can use to connect to a home or car stereo using third-party stereo adapters. Note: Compatible devices must be self-powered.
Connecting to a home stereo
For most home stereo systems, you can connect an iPod to your amplifier's sound input using a 3.5mm mini stereo-to-RCA adapter cable. Adjust the volume on your iPod to less than half to prevent overdriving your amplifier. Adjust the listening volume using your stereo's controls.
Connecting to a car stereo
Use an extension cable with 3.5 mm stereo connectors on each end to connect iPod to your car stereo system's aux input, or use a cassette adapter if your car stereo doesn't have a sound input jack. Either of these items can be purchased at circuitcity.com.
If you’re using Windows, the iTunes and iPod software installer will ask you to connect your iPod so it can be configured to work with your PC. As a Windows user, you might already have iTunes installed. But you won’t be able to use your iPod until you install the iPod software.
Updating songs on your iPod
When you select your iPod from the iTunes source list, you’ll see all the songs stored on your iPod, along with the amount of space being used. The songs appear dimmed because iTunes is set to automatically update the songs on your iPod. To change the songs on your iPod you’ll first need to make the changes in iTunes. Then, select the iPod, go to the File menu and choose update iPod.
Connecting your iPod to another computer
You can only link your iPod to one computer at a time. If you connect your iPod to a computer with a music library that is not linked with your iPod, you’ll see a message asking if you want to overwrite the contents of the iPod with the contents of the new music library. In most cases you’ll want to choose No. However, if you are giving your iPod to someone else or want to update it with another computer, this is an easy way to link an iPod to a different music library.
FireWire and USB cables
If you’re using a Mac that came with a FireWire cable, you can use that to connect. Otherwise, use the included USB cable.
Set up your computer to automatically transfer music to your iPod
Before you can transfer music to your iPod, make sure both iTunes and the iPod software are installed on your computer. If this software isn’t installed, use the CD that came with your iPod to install iTunes and the iPod software.
Open iTunes by clicking the iTunes icon in your Mac’s dock, or choose it from the Windows start menu on your PC.
Before transferring music to your iPod, you need to add music to iTunes. You can do this by importing music from your favorite CDs or by purchasing music from the iTunes Music Store. If you already have music in your library, iTunes automatically imports this music to your iPod.
Connect the iPod to your computer using the included cable.
Notice that your iPod appears on the left side of the iTunes window.
Watch as songs automatically transfer from your iTunes Library to your iPod.
Notice the “Do not disconnect” message in the iTunes window and on your iPod. Don’t disconnect your iPod from your computer while you see this message or you might damage files on your iPod or your computer. If you see this message and think it’s a mistake, try ejecting the iPod in iTunes or in the operating system. Windows users can try using Safe Remove from the System Tray.
When iTunes has finished transferring music to your iPod, the iTunes window and the main menu on your iPod will indicate that the update is complete.
Click the eject button next to the iPod in the iTunes window, disconnect your iPod, and you’re ready to listen to music.
iTunes gives you the flexibility to transfer your entire iTunes music library to your iPod, or just choose certain songs. In some cases, you might have a music library that is larger than your iPod’s storage capacity. Or you might find that having fewer songs on your iPod makes it easier to manage your music while you’re on the go.
You can use iTunes to organize your songs into playlists. Remember, your iPod updated automatically, so if you add or delete a song from a playlist in iTunes, it will also be added or deleted on your iPod the next time you connect it to you computer.
Switching to select playlists only deletes other songs on your iPod
If you choose to update only selected playlists, all the songs on your iPod that are not on the selected playlists will be deleted from your iPod. However, the songs still remain in iTunes, allowing you to put them on your iPod at any time. In the iPod preferences window, simply select the Automatically update all songs and playlists option.
Preventing specific songs from being transferred to your iPod
If you know there are some songs you don’t want to copy to your iPod, you can choose not to transfer them. For example you may have audio books in your iTunes library that you’ve already listened to and don’t want to transfer to your iPod. In iTunes, click the checkbox next to the audio book name to remove the checkmark. Click the iPod Options button and then choose the Only update checked songs option and click OK.
Using multiple iPods with your computer
Each iPod you plug into your computer has its own preferences. This enables you to have multiple iPods, with different settings, linked to your iTunes music library. For example, you may want to transfer all of your music to a 40GB iPod and then use an iPod mini for your “Workout” and “Drive Time” playlists.
Checking how much free space is available on your iPod
You can see how much space is left on your iPod by selecting the iPod in iTunes, and looking at the bottom of the iTunes window. You will see how much space is being used, and how much is available for additional music or other files.
Set up your iPod so that you can update selected songs from playlists.
1. With your iPod connected to your computer, select your iPod in iTunes.
2. Click the iPod Options button in the lower-right corner of the iTunes window.
3. Select the Automatically update selected playlists only option.
4. Select the playlists you want to transfer to your iPod. Only songs in these playlists will remain on your iPod.
5. Click OK to close the iPod Preferences window.
6. Watch as iTunes updates your iPod with the playlists you selected and deletes the songs that were not selected. The iPod icon will flash red and the iTunes window will show Updating iPod while it is updating.
7. When you are done, click the Eject button next to your iPod in iTunes.
2. Add videos to iTunes by importing videos from your hard disk or by downloading videos from the iTunes Music Store. If you have videos on your hard disk that you’d like to view on your iPod, see the QuickTime Tutorial to learn how to convert them to a format your iPod can use.
3. Using the cable that came with your iPod, connect your iPod to a USB 2.0 on your computer.
4. Notice that your iPod appears in the Source List on the left side of the iTunes window, and watch as songs and videos automatically transfer from your iTunes Library to your iPod.
5. You’ll see a “Do not disconnect” message in the iTunes window and on your iPod. Don’t disconnect your iPod from your computer while this message is displayed, or you might damage files on your iPod or your computer. If you see this message and think it’s a mistake, try ejecting the iPod in iTunes. Windows users can try using Safe Remove from the System Tray.
6. When iTunes has finished transferring music and video to your iPod, the iTunes window and the main menu on your iPod will indicate that the update is complete.
7. From the main menu of your iPod, choose Videos, select a video you want to watch, and then choose TV off to view the video on your iPod.
If you have an iPod that supports pictures and you have iTunes 4.7 or later, you can use your iPod to view and store digital photos, along with your favorite music.
You can transfer photos to your iPod by using iTunes. Whether you have a Mac or a PC you’ll be able to move photos you have stored in your computer into your iPod.
Mac photo software requirements
To view photos on your iPod, make sure your software is up to date. iPhoto 4.0.3 is required on the Mac.
PC photo software requirements
With a PC you can store photos in a folder or use Adobe Photoshop Album 2.0 or higher, or Adobe Photoshop Elements 3.0.
Hard disk space requirements on your computer
When you sync your photos to the iPod, you will need extra space on your computer. If you update and send 5GB of photos to your iPod, you will also need to have at least an extra 5GB of space on your computer’s hard disk.
Supported image types
The iPod photo supports a wide range of file types. On the Mac: JPG, GIF, Tiff, Pict, PNG, jpg 2000, SGI, and BMP. And for the PC: JPG, BMP, GIF, TIF, TIFF and PNG.
Music setup in iPhoto
You can have your iPhoto slideshow play with music on your iPod. After your photos and music have transferred to your iPod—you will need to have the music that you used in iPhoto on your iPod—go to the slideshow settings in the Photo menu. Choose From Music and then select From iPhoto. Now, when you watch your slideshow, the music you choose in iPhoto will play along with your photos.
Viewing album art on your iPod photo
You can view the album art that goes with your music on your color iPod. In iTunes’ iPod preferences, you can turn this on by clicking the Display album artwork checkbox. Now, when you play a song on your iPod, you will see the album artwork next to the name. If you would like to view a larger version of the album artwork, click the select button and the larger image will be displayed. To change back to smaller artwork, just click the select button again.
Using the iPod Camera Connector
The iPod Camera Connector allows you to import pictures directly from your digital camera to your iPod, and then import them to your computer. In addition, you can now browse your photos directly on your iPod. To do this, download and run the latest iPod Updater at http://www.apple.com/ipod/download/ to make sure your iPod is running iPod Software 1.1 or later. Note: by clicking this link you will leave circuitcity.com and enter the Apple site, which they operate and control.
Transfer photos from your computer to your iPod photo.
1. On your Mac, create an album in iPhoto that contains the images you want to transfer to your iPod. On your PC, create a folder that contains the photos you want to transfer. Or pick photos from your own collection using Adobe PhotoShop Album 2.0 or higher or Elements 3.0.
2. With your iPod connected, select your iPod in the iTunes source list and then click the iPod Options button.
3. In the iPod preferences window, click the Photos tab.
4. Select an iPhoto album or choose Other to select the folder, or other location, of photos on your hard disk. iTunes cannot access photos that are stored on a locked volume, like a CD.
5. Click OK, and then watch as your iPod is updated, transferring your photos along with your music. Storing images on your iPod will take up more space than just your music.
6. When the update is complete, eject your iPod and disconnect it from your computer.
1. Before you can transfer music to your iPod shuffle, make sure both iTunes and the iPod software are installed on your computer. Download and install the iTunes software from www.itunes.com.
2. Open iTunes by clicking the iTunes icon in your Mac’s dock, or choose it from the Windows start menu on your PC.
3. If you don’t have music already in iTunes, you’ll need to add music first. You can do this by importing music from your favorite CDs or by purchasing music from the iTunes Music Store. Then iTunes will transfer music automatically to your iPod shuffle.
4. Switch your iPod shuffle to off, then connect the iPod shuffle to a USB port on your computer. For the fastest transfers, use a USB 2.0 port.
5. iTunes should launch automatically, if it doesn’t, try launching it manually. Notice that your iPod shuffle appears on the left side of the iTunes window. While the iPod shuffle is connected you will see a flashing orange light on the front.
6. You can manually transfer songs by dragging them to your iPod shuffle, or selecting the iPod shuffle in the source list, and clicking the Autofill button to have iTunes choose your songs for you.
7. Notice the “Do not disconnect” message in the iTunes window and the flashing orange light on the front and back. Don’t disconnect your iPod shuffle from your computer while you see this message, you might damage files on your iPod shuffle or your computer.
8. When iTunes has finished transferring music to your iPod shuffle, the iTunes window will indicate that the update is complete.
9. Click the eject button next to the iPod shuffle in the source list, disconnect your iPod shuffle, and you’re ready to listen to music.
Note: If you don’t see the iPod shuffle in the iTunes source list, it is already ejected. In addition, if you don’t see the eject icon next to the iPod shuffle in the source list, this means it’s already ejected.
Listen to music on your iPod shuffle
1. Turn on your iPod shuffle by moving the switch on the back to the Play in order or Shuffle position. You will know that your iPod is turned on when you see the green stripe on the back.
2. Press the Play/Pause button on the front.
3. You can advance to the next song by pressing the Next/Fast-forward button on the right, or press the Previous/Rewind button to go back to the beginning of a song or a previous song.
4. If you would like to change the volume, press the Volume Up button on the top of the circle, or the Volume Down button at the bottom.
5. When you are done, slide the switch on the back to the Off position.
6. For additional information, go to www.apple.com/support/ipodshuffleNote: by clicking this link you will leave circuitcity.com and enter the Apple site, which they operate and control.
If you are still experiencing problems with your iPod after troubleshooting, you may need to restore your iPod to factory settings. When you reset your iPod to factory settings, all of your music and files will be removed from your iPod. You should only restore if everything else has failed or you’re sure that you want to completely erase your iPod.
If you see a folder with an exclamation point on your iPod
If you see a picture of a folder with an exclamation point on your iPod’s screen when your turn it on, try restoring your iPod software using the iPod updater application. To learn more about problems that could cause this image to appear, check out the iPod support site. Note: by clicking this link you will leave circuitcity.com and enter the Apple site, which they operate and control.
Resetting your iPod shuffle
If your iPod shuffle stops responding, you might need to reset it. Turn it off for five seconds and then turn it back on. If that doesn’t work, connect your iPod shuffle to a high-power USB port on your computer to charge it.
Restore your iPod with the iPod Updater
If you want to start over with your iPod, or you’re getting a new one and giving your old one to a friend, you can use the iPod Updater to restore its original settings.
Restoring doesn’t solve your problems
If using the restore option doesn’t solve the issues with your iPod, visit the AppleCare website for more information. Note: by clicking this link you will leave circuitcity.com and enter the Apple site, which they operate and control.
See the power adapter icon?
If you see the power adapter icon on your iPod screen while updating or restoring, you will need to plug it into the iPod power adapter to complete the update or restore.
After you’ve tried all of the troubleshooting, it’s time to restore your iPod to factory settings
1. Connect your iPod to your computer.
2. Quit iTunes.
3. Open the current iPod Updater. You can download the latest iPod Updater from the iPod support site .
4. Use the Restore option in iPod Updater. You will see an alert message that asks you to confirm this choice. This will restore your iPod to the factory settings, erasing all information on your iPod.
5. During the restore, your iPod will un-mount, and a progress indicator will be displayed on your iPod.
6. When your iPod is finished restoring, quit the updater and launch iTunes.
7. You will be asked to name your iPod, and confirm the settings.
8. When you are done, click the eject button next to the iPod in the iTunes source list.
Your iPod will not play purchased music on your computer
If you have problems playing purchased music from your iPod with your computer, make sure that your computer is authorized to play the music. You will need to authorize each computer that will play the purchased music. Sometimes you may need to de-authorize and then re-authorize your computer to get purchased songs to play. iPod photo requires iTunes 4.7 or later to play purchased music.
Using USB cables
You can use USB 2.0 to transfer your music, but you will need to make sure that your computer is equipped with a USB 2.0 port. If you’re not sure whether you have USB 2.0 or not, check the documentation that came with your computer.
Your iPod doesn’t appear in iTunes or on your computer
If your iPod doesn’t show up in the iTunes source list, on your Mac Desktop, or in Windows Explorer, make sure the cable you use is securely connected to both your iPod and your computer. If that doesn’t fix the problem, try a different connector on your computer or try using a different cable. If your computer is still unable to recognize your iPod, try restarting your computer.
Remember the 5 R’s
If your iPod won't respond when you turn it on, displays the missing folder icon, won't play your songs, or has other problems, just remember the five R’s—reset, retry, restart, reinstall and restore.
These fast fixes will solve most problems with your iPod and get you up and rockin' in no time.
Try these 5 suggestions if you have a problem with your iPod (After making sure your iPod is fully charged)
Reset your iPod by toggling the Hold switch on and off (set it to Hold, and then turn it off again). Then press and hold the Center and Menu buttons for at least six seconds, until the Apple logo appears.
Retry with a different USB port if you cannot see the iPod in iTunes.
Restart your computer and make sure you have the latest software updates installed.
Reinstall iPod and iTunes software from the latest versions on the web at www.apple.com/ipod/downloadNote: by clicking this link you will leave circuitcity.com and enter the Apple site, which they operate and control.
Restore your iPod using the latest iPod Installer.
Resetting older iPod models
To learn more about resetting your iPod, check out the iPod support site.
Note: by clicking this link you will leave circuitcity.com and enter the Apple site, which they operate and control.
You get one free call within the first three months. After that, calls to Apple support are $25 each.
Finding the serial number of your iPod in iTunes when calling AppleCare
If you need to find the serial number for your iPod, open iTunes Preferences with your iPod connected, click the iPod icon, and then click the version number in the top right corner of the window, where you’ll see the serial number. If your iPod is not connected, click the “No iPod connected” message to view the serial number of the last iPod connected to your computer.
Apple phone support: 1-800-275-2273
It’s not too late to purchase the AppleCare Protection Plan—which gives you two full years of hardware protection AND unlimited telephone support. Buy the AppleCare plan here.
Read the guide that came packaged with your MP3 player to discover what each of the buttons do, and the special actions your MP3 player can perform. Check the manufacturer’s website for a 3D demo or FAQ section.
Maximizing battery life
Here are some ways you can get maximum playtime from your MP3 player:
Turn off the MP3 player when you are not using it.
Use the hold switch (if equipped) to prevent the backlight from coming on or keep songs from being switched accidentally if the MP3 player is bumped while in your pocket or purse.
Charge the MP3 player daily, either with a power adapter or by connecting to your computer’s USB port.
Getting the full experience from your MP3 player
The headphones supplied with your player are usually small, basic earbud-style headphones, so upgrading them may improve the sound and fit your lifestyle better.
You’ll need a case to protect your MP3 player from damage caused by being bumped, scratched, dropped, etc.
External speakers, which connect through the headphone jack, let you listen to your music out loud—or share it with others.
Use the included software
Your MP3 player came packaged with a PlaysForSure Easy Start CD. Just put the CD in your computer’s CD-ROM drive, and follow the directions. A friendly voice will talk you through:
Installing the latest version of Windows Media Player, which you will use to manage your music library
Copying or “ripping” music from CDs onto your computer
Connecting your MP3 player to your computer
Moving your music to your MP3 player
Finding an online music store where you can buy even more music
In addition, your MP3 player may include music managing software designed by the manufacturer. This is a standard alternative to the Easy Start CD. Try them both out and see which interface you prefer, or save one as a backup in case you have operational problems. Both offer easy ways to get started in minutes.
How to copy or "rip" a CD using Windows Media Player 11
If your MP3 player came packaged with an Easy Start CD, it’s a great step-by-step tutorial and the easiest way to get started. It includes the latest version of Windows Media Player. If you don’t have an Easy Start CD, you can download Windows Media Player (version 11).
Once you have Windows Media Player installed, run the software and pop your CD in the computer. Click the Rip tab in Windows Media Player. Click the boxes next to songs you want to copy, and click Start Rip. Your songs will appear in your library. In most cases, Windows Media Player will automatically retrieve the CD title, artist and song information, which will then be displayed on your MP3 player when you move the files over to it.
If no media information appears with song and album titles, you should change your privacy settings. You can do that by clicking Tools > Options > and then hitting the Privacy Tab. Check the box next to Display media information from the Internet. Once your media information appears, click the Start Rip button. Windows Media Player rips music into Windows Media Audio (WMA) format, and uses the My Music folder as a default location for copied files.
You can add to your music collection by purchasing multimedia from a variety of sources using Windows Media Player. In the top-right-hand corner of the Windows Media Player window, click on the Online Stores pull-down menu next to the Sync Tab and select Browse All Online Stores. You can then search for music and movies using various stores, including Napster and eMusic.
Two types of online music stores
1. Pay-per-song music downloads: When you purchase an audio download, you pay once to download a specific track. Tracks purchased in this way can be played for an unlimited amount of time, subject to the restrictions specified by the online music store.
2. Flat-fee audio subscriptions: Some online music stores sell subscription services that let you download an unlimited number of tracks for a monthly fee. These subscription services allow you to download as many tracks as you want, but if you stop paying your monthly subscription fee and the subscription expires, the tracks cannot be played. If you have a subscription-compatible MP3 player, these can be a great value since you would get 15 songs for $15 when purchased one at a time, while a $15 subscription gives you access to millions of songs with the ability to download as many songs as you want to your MP3 player.
If you sign up for a PlaysForSure subscription service, you must connect your MP3 player to the computer via USB and visit your online music subscription store at least once each billing period so the MP3 player knows that the audio subscription has not expired. Windows Media Player and Windows XP Service Pack 1 (or greater) must be installed on your computer to use PlaysForSure audio subscription tracks.
Yes, it is still possible to get free music despite what you may have heard. There are still lots of web sites where you can download free, legal MP3 files. Exercise caution when downloading from the Internet—unless you download from a reputable website that promotes legal music, you never know what you could be downloading to your computer.
A few reputable websites offering legal, free music downloads are:
It is easier to manage a lot of songs in your library if you create shorter playlists that contain the songs you want to hear. Playlists are fun and convenient because you can group your music into occasion-specific lists. For example, if you want a high-energy mix for the gym, you won’t have to scroll through thousands of songs to find the right ones.
It’s easy to create playlists in Windows Media Player. Simply click on the Library tab and choose Create Playlist from the drop-down menu. A box appears on the right where you can type in the name of your playlist (such as “Rock Mix”). Then click on the songs in your library you want to add to the playlist, and drag them over to the right.
To find a specific song to add to your MP3 player, just click on the “Library” tab in Windows Media Player and use the search box at the top-left corner to find the song or artist you want to hear.
Windows Media Player 10 makes it easier than ever to synchronize music and video to a wide array of portable devices, including portable media players, storage cards and portable media centers. Simply connect a supported device to your computer, choose the synchronization method you want and you're ready to synchronize your library to your device.
To set up a device
Start Windows Media Player and then connect your device to your computer. The Device Setup Wizard launches.
Choose a synchronization method:
Automatic. With this option, the Player synchronizes content to the device when you connect it to your computer or change synchronization settings. The Player synchronizes your entire library if it can fit, or the Player synchronizes your favorite content first.
Manual. With this option, you pick specific files or playlists you want to synchronize each time you want to make changes to the content on your device.
(Optional) If you selected automatic synchronization and you want to customize the order in which content is synchronized, select the Customize the playlists that will be synchronized check box.
The Custom Sync Settings page of the wizard is displayed, as shown in the following screen shot. Select the check boxes of the playlists you want to synchronize to your device. Click the arrows to move playlists up or down, and the playlists will be synchronized in the order shown on this page.
Click Finish.
Depending on the synchronization method you chose, the following happens when you click Finish:
Automatic . The Player begins synchronizing the content.
Manual . You must select the items you want to synchronize before you can synchronize the device.
Changing the priority order
If you set up automatic synchronization for a device, you can easily change the order in which your content is synchronized.
In Windows Media Player, click Library, and then, in the Contents pane, right-click the device and click Change Sync Settings, as shown in the following screen shot.
In the Synchronization Settings dialog box, do any of the following:
Click the arrows to move playlists up or down; playlists will be synchronized in the order shown on this page.
To remove a playlist so that it will not be synchronized, clear the check box next to the playlist.
To add an existing playlist you want to synchronize, select its check box. You can also click New if you want to create a playlist to synchronize.
Selecting items to synchronize manually
If you are manually synchronizing to a device, you must identify the content you want to synchronize before you begin.
Start Windows Media Player and then connect your device to your computer.
Click Library, click <List Name> List, and then click Sync List, as shown in the following screen shot.
If you need to clear the list before beginning, click Sync List, and then click Clear List.
Drag items from the Contents or Details pane in your library to the List pane to add them to the list of items to be synchronized.
In the List pane, verify that the items you have selected to synchronize will all fit on the device, as shown in the following screen shot. If necessary, remove items from the list.
All MP3 players have a 3.5mm headphone jack you can use to connect to a home or car stereo using third-party stereo adapters. These devices plug into the headphone jack and use a built-in FM transmitter to broadcast your music over any FM radio, or include a cable that allows you to plug directly into an auxiliary input on your home or car stereo.
Note: Compatible devices must be self-powered via batteries, wall plug, or car cigarette lighter adapter.
Connecting to a home stereo
For most home stereo systems, connect your MP3 player to your amplifier's sound input using a 3.5mm mini stereo to RCA adapter cable. Adjust the volume on your MP player to less than half to prevent sound distortion. Adjust the listening volume using your stereo's controls.
Connecting to a car stereo
Use an extension cable with 3.5mm stereo connectors on each end to connect your MP3 player to your car stereo system's AUX input, or use an FM transmitter if your car stereo doesn't have a sound input jack.
There are a couple of ways to get more music on your MP3 player.
Delete the old stuff. Make playlists for your mood, or for the week, or for whatever, and fill and refill your player as needed.
Check your quality settings. Music files come in different formats—like MP3 and WMA—and they are encoded at different quality settings. The higher the quality, the more space the song takes up on your MP3 player. (Note: 128kbps is the most common quality setting, since it takes up relatively little space and offers very good sound.)
Check your file formats. WAV files take up lots of space. Consider converting any song saved as a .wav to an MP3 or WMA file type.
Buy more memory. Many MP3 players have expansion slots that allow you to buy a flash memory card to add more space. Check your owner’s manual to see if your player supports expandable memory and what type of memory it uses.
TV & Home 
Email a friend
Click & Learn: iPods & MP3 players
